1-336 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT
(continued)
82
The test runs correctly. The test generates results when you request periodic
reports. The test also generates results when you stop the test manually, or
when the test stops automatically at a preset time. Decide the action you
want to take.
Note: If a switch restart occurs when a C7BERT runs on a link, the test
stops automatically. If the LIU7 for the link fails, the test also stops
automatically.
83
To display C7BERT results, type
>QUERY link_no
and press Enter.
where
link_no
is the number of the tested link. (0 to 15)
Example of a MAP response:
are not present
step 109
If
Do
you want to request periodic re-
ports
step 89
you want to stop the test manual-
ly
step 93
you want to stop the test auto-
matically at a preset time
step 74
the
link
connects
to
a
NT9X78DA/DB card and you
want to inject bit errors
step 83
If the response
Do
is a display of test statistics
step 84
is other than listed here
step 109
If Transmitted Tx Frames
Do
Link 1: C7BERT query
Run Time : 1224 Err Free Secs: 1133
Tx Frames : 32538 Rx Sync Errs : 0
Rx Frames : 32580 Rx Bad Frames: 1
Rx Bit Errors: 0 Rx Bits : 66673662
Bit Err Rate : 1 x 10– 8
