Trouble locating and clearing procedures (continued) 1-373
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Scheduling an automatic REx test
(continued)
and press Enter.
where
h1 m1
is the start time of the REx test on the 24 h clock, for example, 02 30
h2 m2
is the end time of the REx test on the 24 h clock, for example, 04 30
Note: The value in NODEREXCONTROL must allow enough time to test
all the LIMs that you want to test. Add 30 minutes to the parameter of all
LIMs.
Example input:
>Y 02 30 04 30
Example of a MAP response:
7
To confirm the change, type
>Y
and press Enter.
Example of a MAP response:
8
To quit from the table editor and return to the CI level of the MAP display, type
>QUIT
and press Enter.
9
To post the LIM that you want to include in the REx test, type
>MAPCI;MTC;PM;POST LIM lim_no
and press Enter.
where
lim_no
is the number of the first LIM that you will post (0 to 16)
CAUTION
Possible loss of service
Do not isolate nodes on the F-bus of the LIM you are testing.
If you isolate any of the nodes on the F-bus of the LIM you
are testing, the REx test will not proceed.
TUPLE TO BE CHANGED:
NODEREXCONTROL Y 02 30 04 30
ENTER Y TO CONFIRM, N TO REJECT, OR E TO EDIT.
TUPLE CHANGED
