Trouble locating and clearing procedures (continued) 1-421
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Testing an SPM OC3 interface module
(continued)
Testing an SPM OC3 interface module
At the MAP terminal:
1
Access the PM screen level of the MAP display by typing
>MAPCI;MTC;PM
and pressing the Enter key.
2
Access the SPM screen by typing
>POST SPM spm_no
and pressing the Enter key.
where
spm_no
is the number of the SPM (0 to 63)
The following is an example of an SPM screen. This example may not reflect
your SPM screen.
3
Access the OC3 card by typing
>SELECT oc3_no
and pressing the Enter key.
where
oc3_no
is the number of the OC3 card (0 or 1)
The following is an example of an OC3 screen.
CM MS IOD Net PM CCS Lns Trks Ext APPL
. . . . . . . . . .
SPM
0 Quit
2 Post_
3 ListSet
4 ListRes
5 Trnsl
6
7
8
9
10
11 Disp_
12 Next
13 Select_
14 QueryPM
15 ListAlm_
16
17
18
SysB ManB OffL CBsy ISTb InSv
PM 0 0 0 0 0 1
SPM 0 0 0 0 0 1
SPM 11 INSV Loc: Site HOST Floor 2 Row A FrPos 0
Shlf0 SL A Stat Shlf0 SL A Stat Shlf1 SL A Stat Shlf1 SL A Stat
DSP 2 1 A Insv CEM 1 8 I Insv VSP 2 1 A Insv ––– – 8 – ––––
DSP 0 2 A Insv OC3 0 9 A Insv ––– – 2 – –––– VSP 6 9 A Insv
DSP 1 3 I Insv OC3 1 10 I Insv ––– – 3 – –––– ––– – 10 – ––––
DSP 3 4 I Insv ––– – 11 – –––– ––– – 4 – –––– ––– – 11 – ––––
––– – 5 – –––– ––– – 12 – –––– ––– – 5 – –––– ––– – 12 – ––––
––– – 6 – –––– VSP 4 13 A Insv ––– – 6 – –––– ––– – 13 – ––––
CEM 0 7 A Insv VSP 5 14 A Insv ––– – 7 – –––– ––– – 14 – ––––
14:12 >
