Trouble locating and clearing procedures (continued) 1-329
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Running a C7BERT
(continued)
link_no
is the number of the link (0 to 15)
57
Determine the synchronization state of the link.
Note: The synchronization state appears under the Sync Stat header of
the MAP display.
58
Wait 8 minutes, and continue with the procedure.
59
Determine the synchronization state of the link.
60
Determine from office records the far-end office that connects to the linkset
posted in step 4.
61
Contact the far-end office. Tell the person at that location that
•
you are going to busy and deactivate the link in order to realign it, and that
•
the person at the far end and you must activate the link after you busied
and deactivated the link
Go to step 57.
62
To deactivate the link, type
>DEACT link_no FORCE
and press Enter.
where
link_no
is the number of the link you activated in step 56
If the ACT command
Do
passed
step 57
failed
step 66
other than listed here
step 66
If the synchronization state
Do
is Alnd
step 54
is other than listed here
step 58
If the synchronization state is
not Alnd, and you
Do
did not ask the far-end office to
activate the link
step 60
already asked the far-end office
to activate the link
step 62
