Trouble locating and clearing procedures (continued) 1-391
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Setting up the signaling link marginal performance report
(continued)
37
To specify that you want to add a new class to a printer, type
>ADD
and press Enter.
Example of a MAP display:
38
To specify the printer that the log will travel to, type
>printer
and press Enter.
where
printer
is the name of the printer that will print the log.
Note: The name assigned in table TERMDEV must identify the printer.
Example of a MAP response:
39
To specify an alternate printer in case the printer specified in step 38 fails,
type
>printer2
and press Enter.
where
printer2
is the name of an alternate printer that will print the log
Note: If an alternate printer is not available, enter NIL.
Example of a MAP response:
40
To specify a new class (1 greater than the last class listed in the table as noted
in step 26), type
>`(new_class_number)'
and press Enter.
where
new_class_number
is the number of a new class
Example input:
`(1)'
Example of a MAP display:
DEV:
ALT:
CLASSES:
FORMAT:
