1-350 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT for high-speed links
(continued)
20
To manually busy the link, type
>BSY link_no
and press the Enter key.
where
link_no
is the number of the link you want to test (0 to 15)
21
To return the link to service, type
>RTS link_no
and press the Enter key.
where
link_no
is the number of the link you want to test (0 to 15)
Note: This action places the link into the SysB/DAct state.
22
To enter the C7BERT level of the MAP display, type
>C7BERT
and press the Enter key.
If the BSY command
Do
passed
step 21
failed
step 78
If the RTS command
Do
passed
step 22
failed
step 78
If you want to
Do
perform a local loopback
step 23
perform a remote loopback
step 25
perform a far-end DS-1 ESF
loopback
step 33
run C7BERT
step 39
enable the high-speed signaling
terminal (HST) to scan for con-
trol codes
step 63