manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 465

462

Port-Channel/LAG (802.3ad) Commands

 

show port-channel 

This command displays an overview of all port-channels (LAGs) on the switch. 
Instead of slot/port, 

lag 

lag-intf-num

 

can be used as an alternate way to 

specify the LAG interface.

 lag 

lag-intf-num

 can also be used to specify the 

LAG interface where 

lag-intf-num

 is the LAG port number.

Format

show port-channel

Mode

Privileged EXEC

Term

Definition

Logical Interface

The valid slot/port number.

Port-Channel Name

The name of this port-channel (LAG). You may 
enter any string of up to 15 alphanumeric characters.

Link State

Indicates whether the Link is up or down.

Admin Mode

May be enabled or disabled. The factory default is 
enabled. 

Type

The status designating whether a particular port-
channel (LAG) is statically or dynamically 
maintained. 

◆

Static 

- The port-channel is statically 

maintained.

◆

Dynamic 

- The port-channel is dynamically 

maintained.

Load Balance Option 

The load balance option associated with this LAG. 
See “

port-channel load-balance

” on page 457.

Local Preference 
Mode

Indicates whether the local preference mode is 

enabled

 or 

disabled

.

Mbr Ports

A listing of the ports that are members of this port-
channel (LAG), in slot/port notation. There can be a 
maximum of eight ports assigned to a given port-
channel (LAG).

Device Timeout

For each port, lists the timeout (

long

 or 

short

) for 

Device Type (

actor

 or 

partner

).

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands