manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 545

542

Port Security Commands

 

port-security mac-
address move

This command converts dynamically locked MAC addresses to statically locked 
addresses for an interface or range of interfaces.

port-security mac-
address sticky

This command enables sticky mode Port MAC Locking on a port. If 
accompanied by a MAC address and a VLAN id (for interface config mode 
only), it adds a sticky MAC address to the list of statically locked MAC 
addresses. These sticky addresses are converted back to dynamically locked 
addresses if sticky mode is disabled on the port. The <vid> is the VLAN ID. The 
Global command applies the “sticky” mode to all valid interfaces (physical and 
LAG). There is no global sticky mode as such.

Sticky addresses that are dynamically learned will appear in “

show running-

config

” on page 177 as “port-security mac-address sticky <mac> <vid>” entries. 

This distinguishes them from static entries.

The following shows an example of the command.

(CN1610)(Config)# port-security mac-address sticky

(CN1610)(Interface)# port-security mac-address sticky

(CN1610)(Interface)# port-security mac-address sticky 

  00:00:00:00:00:01 2

no port-security 
mac-address sticky

The 

no

 form removes the sticky mode. The sticky MAC address can be deleted 

by using the command “no port-security mac-address <mac-address> <vid>”.

Format

no port-security mac-address 

mac-address vid

 

Mode

Interface Config

Format

port-security mac-address move

Mode

Interface Config

Format

port-security mac-address sticky [<mac-address> <vid>]

Mode

◆

Global Config

◆

Interface Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands