manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 240

Chapter 4: Utility Commands

237

 

DNS Client Commands

These commands are used in the Domain Name System (DNS), an Internet 
directory service. DNS is how domain names are translated into IP addresses. 
When enabled, the DNS client provides a hostname lookup service to other 
components of FASTPATH.

ip domain lookup

Use this command to enable the DNS client.

no ip domain 
lookup

Use this command to disable the DNS client.

ip domain name

Use this command to define a default domain name that FASTPATH software 
uses to complete unqualified host names (names with a domain name).

 

By 

default, no default domain name is configured in the system. 

name

 may not be 

longer than 255 characters and should not include an initial period. This 

name

 

should be used only when the default domain name list, configured using the 

ip 

domain list command, 

is empty.

The CLI command 

ip domain name yahoo.com

 will configure yahoo.com as a 

default domain name. For an unqualified hostname xxx, a DNS query is made to 
find the IP address corresponding to xxx.yahoo.com.

Default

enabled

Format

ip domain lookup

Mode

Global Config

Format

no ip domain lookup

Mode

Global Config

Default

none

Format

ip domain name 

name

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands