manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 409

406

Port-Based Network Access Control Commands

 

no dot1x port-
control all

This command sets the authentication mode on all ports to the default value.

dot1x mac-auth-
bypass

If the 802.1X mode on the interface is mac-based, you can optionally use this 
command to enable MAC Authentication Bypass (MAB) on an interface. MAB 
is a supplemental authentication mechanism that allows 802.1X unaware clients 
– such as printers, fax machines, and some IP phones — to authenticate to the 
network using the client MAC address as an identifier.

no dot1x mac-auth-
bypass

This command sets the MAB mode on the ports to the default value.

dot1x re-
authenticate

This command begins the reauthentication sequence on the specified port. This 
command is only valid if the control mode for the specified port is 

auto

 or 

mac-

based

. If the control mode is not 

auto

 or 

mac-based

, an error will be returned.

dot1x re-
authentication

This command enables reauthentication of the supplicant for the specified 
interface or range of interfaces.

Format

no dot1x port-control all 

Mode

Global Config

Default

disabled

Format

dot1x mac-auth-bypass

Mode

Interface Config

Format

no dot1x mac-auth-bypass

Mode

Interface Config

Format

dot1x re-authenticate slot/port

Mode

Privileged EXEC

Default

disabled

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands