manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 423

420

Port-Based Network Access Control Commands

 

Authenticator PAE 
State

Current state of the authenticator PAE state machine. 
Possible values are Initialize, Disconnected, 
Connecting, Authenticating, Authenticated, 
Aborting, Held, ForceAuthorized, and 
ForceUnauthorized. When MAC-based 
authentication is enabled on the port, this parameter 
is deprecated.

Backend 
Authentication State

Current state of the backend authentication state 
machine. Possible values are Request, Response, 
Success, Fail, Timeout, Idle, and Initialize. When 
MAC-based authentication is enabled on the port, 
this parameter is deprecated.

Quiet Period

The timer used by the authenticator state machine on 
this port to define periods of time in which it will not 
attempt to acquire a supplicant. The value is 
expressed in seconds and will be in the range 0 and 
65535.

Transmit Period

The timer used by the authenticator state machine on 
the specified port to determine when to send an 
EAPOL EAP Request/Identity frame to the 
supplicant. The value is expressed in seconds and 
will be in the range of 1 and 65535.

Guest-VLAN ID

The guest VLAN identifier configured on the 
interface.

Guest VLAN Period

The time in seconds for which the authenticator 
waits before authorizing and placing the port in the 
Guest VLAN, if no EAPOL packets are detected on 
that port.

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands