manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 592

Chapter 5: Switching Commands

589

 

show isdp 
neighbors

This command displays the list of neighboring devices.

The following shows example CLI display output for the command.

(CN1610) #show isdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route 

Bridge,

                  S - Switch, H - Host, I - IGMP, r - Repeater

 Device ID           Intf Holdtime  Capability   Platform       Port 

ID             

-------------------- ----- --------- ------------ -----------------

--- --------------------

Format

show isdp neighbors [{slot/port

 

| detail}]

Mode

Privileged EXEC

Term

Definition

Device ID

The device ID associated with the neighbor which 
advertised the information.

IP Addresses

The IP addresses associated with the neighbor.

Capability

ISDP functional capabilities advertised by the 
neighbor.

Platform

The hardware platform advertised by the neighbor.

Interface

The interface (slot/port) on which the neighbor's 
advertisement was received.

Port ID

The port ID of the interface from which the neighbor 
sent the advertisement.

Hold Time

The hold time advertised by the neighbor.

Advertisement 
Version

The version of the advertisement packet received 
from the neighbor.

Entry Last Changed 
Time

Time when the entry was last modified.

Version

The software version that the neighbor is running.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands