manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 512

Chapter 5: Switching Commands

509

 

no set igmp

This command disables IGMP Snooping on the system, an interface, a range of 
interfaces, or a VLAN. 

set igmp header-
validation

This command enables header validation for IGMP messages. 

When header validation is enabled, IGMP Snooping checks: 

◆

The time-to-live(TTL) field in the IGMP header and drops packets where 
TTL is not equal to 1. The TTL field should always be set to 1 in the headers 
of IGMP reports and queries.

◆

The presence of the router alert option (9404) in the IP packet header of the 
IGMPv2 message and drops packets that do not include this option.

◆

The presence of the router alert option (9404) and ToS Byte = 0xC0 (Internet 
Control) in the IP packet header of IGMPv3 message and drops packets that 
do not include these options.

no set igmp header-
validation

This command disables header validation for IGMP messages.

set igmp 
interfacemode 

This command enables IGMP Snooping on all interfaces. If an interface has 
IGMP Snooping enabled and you enable this interface for routing or enlist it as a 
member of a port-channel (LAG), IGMP Snooping functionality is disabled on 

Format

no set igmp [

vlan_id

]

Mode

◆

Global Config

◆

Interface Config

◆

VLAN Config

Default

enabled

Format

set igmp header-validation 

Mode

Global Config

Format

no set igmp header-validation

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands