manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 645

642

DiffServ Show Commands

 

Mark CoS

The class of service value that is set in the 802.1p 
header of inbound packets. This is not displayed if 
the mark cos was not specified.

Mark CoS as 
Secondary CoS

The secondary 802.1p priority value (second/inner 
VLAN tag. Same as CoS (802.1p) marking, but the 
dot1p value used for remarking is picked from the 
dot1p value in the secondary (i.e. inner) tag of a 
double-tagged packet.

Mark IP DSCP

The mark/re-mark value used as the DSCP for traffic 
matching this class. This is not displayed if mark ip 
description is not specified.

Mark IP Precedence

The mark/re-mark value used as the IP Precedence 
for traffic matching this class. This is not displayed 
if mark ip precedence is not specified.

Mirror

Copies a classified traffic stream to a specified 
egress port (physical port or LAG). This can occur in 
addition to any marking or policing action. It may 
also be specified along with a QoS queue 
assignment. 

Non-Conform Action

The current setting for the action taken on a packet 
considered to not conform to the policing 
parameters. This is not displayed if policing not in 
use for the class under this policy.

Non-Conform COS

The CoS mark value if the non-conform action is 
set-cos-transmit.

Non-Conform DSCP 
Value

The DSCP mark value if the non-conform action is 
set-dscp-transmit.

Non-Conform IP 
Precedence Value

The IP Precedence mark value if the non-conform 
action is set-prec-transmit.

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands