manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 411

408

Port-Based Network Access Control Commands

 

no dot1x system-
auth-control 
monitor

This command disables the 802.1X Monitor mode on the switch.

dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator 
state machine on an interface or range of interfaces. Depending on the token used 
and the value (in seconds) passed, various timeout configurable parameters are 
set. The following tokens are supported:

Mode

Global Config

Format

no dot1x system-auth-control monitor

Mode

Global Config

Tokens

Definition

guest-vlan-period

The time, in seconds, for which the authenticator 
waits to see if any EAPOL packets are received on a 
port before authorizing the port and placing the port 
in the guest vlan (if configured). The guest vlan 
timer is only relevant when guest vlan has been 
configured on that specific port.

reauth-period 

The value, in seconds, of the timer used by the 
authenticator state machine on this port to determine 
when reauthentication of the supplicant takes place. 
The reauth-period must be a value in the range 1 - 
65535.

quiet-period

The value, in seconds, of the timer used by the 
authenticator state machine on this port to define 
periods of time in which it will not attempt to 
acquire a supplicant. The quiet-period must be a 
value in the range 0 - 65535.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands