manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 123

120

RADIUS Commands

 

dnsname

The DNS name of the server.

servername

The alias name to identify the server.

RADIUS Accounting 
Server Name

The name of the accounting server.

Server Host Address

The IP address of the host.

Round Trip Time

The time interval, in hundredths of a second, 
between the most recent Accounting-Response and 
the Accounting-Request that matched it from this 
RADIUS accounting server.

Requests

The number of RADIUS Accounting-Request 
packets sent to this server. This number does not 
include retransmissions.

Retransmission

The number of RADIUS Accounting-Request 
packets retransmitted to this RADIUS accounting 
server.

Responses

The number of RADIUS packets received on the 
accounting port from this server.

Malformed Responses

The number of malformed RADIUS Accounting-
Response packets received from this server. 
Malformed packets include packets with an invalid 
length. Bad authenticators or signature attributes or 
unknown types are not included as malformed 
accounting responses.

Bad Authenticators

The number of RADIUS Accounting-Response 
packets containing invalid authenticators received 
from this accounting server.

Pending Requests

The number of RADIUS Accounting-Request 
packets sent to this server that have not yet timed out 
or received a response.

Timeouts

The number of accounting timeouts to this server.

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands