manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 209

206

Email Alerting and Mail Server Commands

 

show logging email 
statistics

This command displays email alerting statistics.

Email Alert From 
Address

The email address of the sender (the switch).

Email Alert Urgent 
Severity Level

The lowest severity level that is considered urgent. 
Messages of this type are sent immediately.

Email Alert Non 
Urgent Severity Level

The lowest severity level that is considered non-
urgent. Messages of this type, up to the urgent level, 
are collected and sent in a batch email. Log 
messages that are less severe are not sent in an email 
message at all.

Email Alert Trap 
Severity Level

The lowest severity level at which traps are logged.

Email Alert 
Notification Period

The amount of time to wait between non-urgent 
messages.

Email Alert To 
Address Table

The configured email recipients.

Email Alert Subject 
Table

The subject lines included in urgent (Type 1) and 
non-urgent (Type 2) messages.

For Msg Type urgent, 
subject is

The configured email subject for sending urgent 
messages.

For Msg Type non-
urgent, subject is

The configured email subject for sending non-urgent 
messages.

Term

Definition

Format

show logging email statistics

Mode

Privileged EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands