manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 300

Chapter 4: Utility Commands

297

 

Maximum Table Size

Maximum number of entries that the history table 
can hold.

Time

Time at which the sample is collected, displayed as 
period seconds.

CRC Align

Number of CRC align errors.

Undersize Packets

Total number of undersize packets. Packets are less 
than 64 octets long (excluding framing bits, 
including FCS octets).

Oversize Packets

Total number of oversize packets. Packets are longer 
than 1518 octets (excluding framing bits, including 
FCS octets).

Fragments

Total number of fragment packets. Packets are not 
an integral number of octets in length or had a bad 
Frame Check Sequence (FCS), and are less than 64 
octets in length (excluding framing bits, including 
FCS octets).

Jabbers

Total number of jabber packets. Packets are longer 
than 1518 octets (excluding framing bits, including 
FCS octets), and are not an integral number of octets 
in length or had a bad Frame Check Sequence 
(FCS).

Octets

Total number of octets received on the interface.

Packets

Total number of packets received (including error 
packets) on the interface.

Broadcast

Total number of good Broadcast packets received on 
the interface.

Multicast

Total number of good Multicast packets received on 
the interface.

Util

Port utilization of the interface associated with the 
history index specified.

Dropped Collisions

Total number of dropped collisions.

Parameter

Description

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands