manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 632

Chapter 7: Quality of Service Commands

629

 

drop

This command specifies that all packets for the associated traffic stream are to be 
dropped at ingress.

mirror

This command specifies that all incoming packets for the associated traffic 
stream are copied to a specific egress interface (physical port or LAG).

redirect

This command specifies that all incoming packets for the associated traffic 
stream are redirected to a specific egress interface (physical port or port-channel). 

conform-color

Use this command to enable color-aware traffic policing and define the conform-
color class map. Used in conjunction with the police command where the fields 
for the conform level are specified. The 

class-map-name

 parameter is the name 

of an existing DiffServ class map.

Format

drop

Mode

Policy-Class-Map Config

Incomp
atibilitie
s

Assign Queue, Mark (all forms), Mirror, Police, Redirect

Format

mirror slot/port

Mode

Policy-Class-Map Config

Incomp
atibilitie
s

Drop, Redirect

Format

redirect

 

slot/port

Mode

Policy-Class-Map Config

Incomp
atibilitie
s

Drop, Mirror

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands