manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 457

454

Port-Channel/LAG (802.3ad) Commands

 

Note

This command is applicable only to physical interfaces.

no lacp partner 
system priority

Use this command to configure the default administrative value of priority 
associated with the Partner’s System ID.

interface lag

Use this command to enter Interface configuration mode for the specified LAG.

port-channel static

This command enables the static mode on a port-channel (LAG) interface or 
range of interfaces. By default the static mode for a new port-channel is enabled, 
which means the port-channel is static. If the maximum number of allowable 
dynamic port-channels are already present in the system, the static mode for a 
new port-channel is enabled, which means the port-channel is static. You can 
only use this command on port-channel interfaces.

no port-channel 
static   

This command sets the static mode on a particular port-channel (LAG) interface 
to the default value. This command will be executed only for interfaces of type 
port-channel (LAG).

Format

no lacp partner system priority

Mode

Interface Config

Format

interface lag 

lag-interface-number

Mode

Global Config

Default

enabled

Format

port-channel static

Mode

Interface Config 

Format

no port-channel static

Mode

Interface Config 

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands