manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 94

Chapter 3: Management Commands

91

 

snmp-server enable 
traps violation

The Port MAC locking component interprets this command and configures 
violation action to send an SNMP trap with default trap frequency of 30 seconds. 
The Global command configures the trap violation mode across all interfaces 
valid for port-security. There is no global trap mode as such.

Note

For other port security commands, see “

Port Security Commands

” on page 540.

no snmp-server 
enable traps 
violation

This command disables the sending of new violation traps.

snmp-server enable 
traps 

This command enables the Authentication Flag.

Parameter

Description

community-string

The community which is created and then associated 
with the group. The range is 1 to 20 characters.

group-name

The name of the group that the community is 
associated with. The range is 1 to 30 characters.

ipaddress

Optionally, the IPv4 address that the community 
may be accessed from.

Default

disabled

Format

snmp-server enable traps violation

Mode

◆

Global Config

◆

Interface Config 

Format

no snmp-server enable traps violation

Mode

Interface Config 

Default

enabled

Format

snmp-server enable traps 

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands