NetApp CN1610 Cli Command Reference Download Page 663

Page: 663 / 708

660

IP Access Control List Commands

[icmp-type

icmp-type

[icmp-code

icmp-

code

] | icmp-message

icmp-message

]

Note

This option is available only if the protocol is
icmp.

Specifies a match condition for ICMP packets.

When

icmp-type

is specified, the IP ACL rule

matches on the specified ICMP message type, a
number from 0 to 255.

When

icmp-code

is specified, the IP ACL rule

matches on the specified ICMP message code, a
number from 0 to 255.

Specifying

icmp-message

implies that both

icmp-type

and

icmp-code

are specified. The

following icmp-messages are supported:

echo

echo-reply

host-redirect

mobile-

redirect

net-redirect

net-

unreachable

redirect

packet-too-big

port-unreachable

source-quench

router-solicitation

router-

advertisement

time-exceeded

ttl-

exceeded

and

unreachable

igmp-type

igmp-type

This option is available only if the protocol is
igmp.

When

igmp-type

is specified, the IP ACL rule

matches on the specified IGMP message type, a
number from 0 to 255.

fragments

Specifies that the IP ACL rule matches on
fragmented IP packets.

[log]

Specifies that this rule is to be logged.

Parameter

Description

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands

NetApp CN1610, Cli Command Reference

Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands