manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 113

110

RADIUS Commands

 

no radius server 
host

The 

no

 version of this command deletes the configured server entry from the list 

of configured RADIUS servers. If the RADIUS authenticating server being 
removed is the active server in the servers that are identified by the same server 
name, then the RADIUS client selects another server for making RADIUS 
transactions. If the 'auth' token is used, the previously configured RADIUS 
authentication server is removed from the configuration. Similarly, if the 'acct' 
token is used, the previously configured RADIUS accounting server is removed 
from the configuration. The 

ipaddr|dnsname

 parameter must match the IP 

address or DNS name of the previously configured RADIUS authentication / 
accounting server.

The following shows an example of the command.

(CN1610) (Config) #radius server host acct 192.168.37.60

(CN1610) (Config) #radius server host acct 192.168.37.60 port 1813

(CN1610) (Config) #radius server host auth 192.168.37.60 name 

Network1_RS port 1813

(CN1610) (Config) #radius server host acct 192.168.37.60 name 

Network2_RS

(CN1610) (Config) #no radius server host acct 192.168.37.60

radius server key

This command configures the key to be used in RADIUS client communication 
with the specified server. Depending on whether the 'auth' or 'acct' token is used, 
the shared secret is configured for the RADIUS authentication or RADIUS 
accounting server. The IP address or hostname provided must match a previously 
configured server. When this command is executed, the secret is prompted. 

Text-based configuration supports Radius server’s secrets in encrypted and non-
encrypted format. When you save the configuration, these secret keys are stored 
in encrypted format only. If you want to enter the key in encrypted format, enter 
the key along with the encrypted keyword. In the “

show running-config

” on 

page 177 command’s display, these secret keys are displayed in encrypted 
format. You cannot show these keys in plain text format.

servername

The alias name to identify the server.

Field

Description

Format

no radius server host {auth | acct} {

ipaddr|dnsname

}

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands