manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 603

600

IPv6 Management Commands

 

The following is an example of the command. 

(CN1610) #show network ipv6 neighbors

Neighbor  Age

IPv6 Address 

MAC Address       isRtr State    (Secs) 

Type

------------------------ ----------------- ----- --------- ------

------

FE80::5E26:AFF:FEBD:852C 5c:26:0a:bd:85:2c FALSE Reachable 0 

Static 

show serviceport 
ipv6 neighbors

Use this command to displays information about the IPv6 neighbor entries 
cached on the service port. The information is updated to show the type of the 
entry.

Field

Description

IPv6 Address

The IPv6 address of the neighbor.

MAC Address

The MAC Address of the neighbor.

isRtr

Shows if the neighbor is a router. If TRUE, the 
neighbor is a router; FALSE it is not a router.

Neighbor State

The state of the neighbor cache entry. Possible 
values are: Incomplete, Reachable, Stale, Delay, 
Probe, and Unknown

Age

The time in seconds that has elapsed since an entry 
was added to the cache.

Last Updated

The time in seconds that has elapsed since an entry 
was added to the cache.

Type

The type of neighbor entry. The type is Static if the 
entry is manually configured and Dynamic if 
dynamically resolved. 

Default

None

Format

show serviceport ipv6 neighbors

Mode

Privileged EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands