manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 380

Chapter 5: Switching Commands

377

 

switchport trunk 
allowed vlan

Use this command to configure the list of allowed VLANs that can receive and 
send traffic on this interface in tagged format when in trunking mode. The default 
is all.

The VLANs list can be modified using the add or remove options or replaced 
with another list using the vlan-list, all, or except options. If all is choosen, all 
VLANs are added to the list of allowed vlan. The except option provides an 
exclusion list. 

Trunk ports accept tagged packets, where tagged packets are processed on the 
VLAN ID contained in the packet, if this VLAN is in the allowed VLAN list. 
Tagged packets received with a VLAN ID to which the port is not a member are 
discarded and MAC learning is not performed. If a VLAN is added to the system 
after a port is set to the Trunk mode and it is in the allowed VLAN  list, this 
VLAN is assigned to this port automatically.

Default

All

Format

switchport trunk allowed vlan {

vlan-list

 | all | {add 

vlan-list

} | {remove 

vlan-list

} | {except 

vlan-list

 

}}

Mode

Interface Config

Parameter

 Description

all

Specifies all VLANs from 1 to 4093. This keyword 
is not allowed on commands that do not permit all 
VLANs in the list to be set at the same time.

add

Adds the defined list of VLANs to those currently 
set instead of replacing the list.

remove

Removes the defined list of VLANs from those 
currently set instead of replacing the list. Valid IDs 
are from 1 to 4093; extended-range VLAN IDs of 
the form X-Y or X,Y,Z are valid in this command.

except

Lists the VLANs that should be calculated by 
inverting the defined list of VLANs. (VLANs are 
added except the ones specified.)

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands