manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 472

Chapter 5: Switching Commands

469

 

show vlan remote-
span

This command displays the configured RSPAN VLAN. 

The following shows example output for the command. 

(CN1610)# show vlan remote-span

Remote SPAN VLAN

------------------------------------------------------------------

------

Source Port

The port, which is configured as mirrored port 
(source port) for the session identified with

 

session-id

. 

If no source port is configured for the 

session then this field is blank.

Type

Direction in which source port configured for port 
mirroring.Types are tx for transmitted packets and rx 
for receiving packets.

Src VLAN

All member ports of this VLAN are mirrored. If the 
source VLAN is not configured, this field is blank.

Ref. Port

This port carries all the mirrored traffic at the source 
switch.

Src Remote VLAN

The source VLAN is configured at the destination 
switch. If the remote VLAN is not configured, this 
field is blank.

Dst Remote VLAN

The destination VLAN is configured at the source 
switch. If the remote VLAN is not configured, this 
field is blank.

IP ACL

The IP access-list id or name attached to the port 
mirroring session.

MAC ACL

The MAC access-list name attached to the port 
mirroring session.

Term

Definition

Format

show vlan remote-span

Mode

Privileged EXEC Mode

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands