manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 99

96

SNMP Commands

 

no snmp-server 
filter

This command removes the specified filter.

snmp-server group

This command creates an SNMP access group.

included

The tree is included in the filter.

excluded

The tree is excluded from the filter.

Parameter

Description

Default

No filters are created by default.

Format

snmp-server filter 

filtername

 [

oid-tree

] 

Mode

Global Config

Default

Generic groups are created for all versions and privileges using the 
default views.

Format

snmp-server group 

group-name

 {v1 | v2c | v3 {noauth | 

auth | priv}} [context 

context-name

] [read 

read-view

] 

[write 

write-view

] [notify 

notify-view

]

Mode

Global Config

Parameter

Description

group-name

The group name to be used when configuring 
communities or users. The range is 1 to 30 
characters.

v1

This group can only access via SNMPv1.

v2

This group can only access via SNMPv2c.

v3

This group can only access via SNMPv3.

noauth

This group can be accessed only when not using 
Authentication or Encryption. Applicable only if 
SNMPv3 is selected.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands