NetApp CN1610, Cli Command Reference

Page: 340 / 708

Chapter 5: Switching Commands 337
show spanning-tree
brief
This command displays spanning tree settings for the bridge. The following
information appears.
The following shows example CLI display output for the command.
(CN1610) #show spanning-tree brief
Bridge Priority................................ 32768
Bridge Identifier..............................
80:00:00:10:18:48:FC:07
Bridge Max Age................................. 20
Bridge Max Hops................................ 20
Bridge Hello Time.............................. 2
Bridge Forward Delay........................... 15
Bridge Hold Time............................... 6
(CN1610) #
Format
show spanning-tree brief
Mode
◆
Privileged EXEC
◆
User EXEC
Term Definition
Bridge Priority Configured value.
Bridge Identifier The bridge identifier for the selected MST instance.
It is made up using the bridge priority and the base
MAC address of the bridge.
Bridge Max Age Configured value.
Bridge Max Hops Bridge max-hops count for the device.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of
Configuration Bridge Protocol Data Units (BPDUs).