NetApp CN1610, Cli Command Reference

Page: 636 / 708

Chapter 7: Quality of Service Commands 633
For set-dscp-transmit, a
dscpval
value is required and is specified as either an
integer from 0 to 63, or symbolically through one of the following keywords:
af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1,
cs2, cs3, cs4, cs5, cs6, cs7, ef.
For set-prec-transmit, an IP Precedence value is required and is specified as an
integer from 0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an
integer from 0-7.
The following shows an example of the command.
(CN1610) (Config-policy-classmap)#police-simple 1 128 conform-
action transmit violate-action drop
police-single-rate This command is the single-rate form of the police command and is used to
establish the traffic policing style for the specified class. For each outcome, the
only possible actions are drop, set-cos-as-sec-cost, set-cos-transmit, set-sec-cos-
transmit, set-dscp-transmit, set-prec-transmit, or transmit. In this single-rate form
of the
police command, the conform action defaults to send, the exceed action
defaults to drop, and the violate action defaults to drop. These actions can be set
with this command once the style has been configured.
Format
police-simple { 1-4294967295 1-128 conform-action
{drop | set-cos-as-sec-cos | set-cos-transmit 0-7 |
set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 |
set-dscp-transmit 0-63 | transmit} [violate-action
{drop | set-cos-as-sec-cos | set-cos-transmit 0-7 |
set-sec-cos-transmit 0-7 | set-prec-transmit 0-7 |
set-dscp-transmit 0-63 | transmit}]}
Mode Policy-Class-Map Config
Incomp
atibilitie
s Drop, Mark (all forms)