manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 101

98

SNMP Commands

 

no snmp-server 
host

This command removes the specified host entry.

snmp-server user

This command creates an SNMPv3 user for access to the system.

Parameter

Description

host-addr

The IPv4 or IPv6 address of the host to send the trap 
or inform to.

traps

Send SNMP traps to the host. This option is selected 
by default.

version 1

Sends SNMPv1 traps. This option is not available if 
informs is selected.

version 2

Sends SNMPv2c traps. This option is not available if 
informs is selected. This option is selected by 
default.

informs

Send SNMPv2 informs to the host.

seconds

The number of seconds to wait for an 
acknowledgement before resending the Inform. The 
default is 15 seconds. The range is 1 to 300 seconds.

retries

The number of times to resend an Inform. The 
default is 3 attempts. The range is 0 to 255 retries.

community-string

Community string sent as part of the notification. 
The range is 1 to 20 characters.

port

The SNMP Trap receiver port. The default is port 
162.

filter-name

The filter name to associate with this host. Filters 
can be used to specify which traps are sent to this 
host. The range is 1 to 30 characters.

Format

no snmp-server host 

host-addr 

[traps|informs]

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands