manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 316

Chapter 5: Switching Commands

313

 

show port

This command displays port information.

 

Format

show port {

intf-range

 | all}

Mode

Privileged EXEC

Parameter

Definition

Interface

slot/port

Type

If not blank, this field indicates that this port is a 
special type of port. The possible values are:

◆

Mirror 

— this port is a monitoring port. For 

more information, see “

Port Mirroring 

Commands

” on page 466.

◆

PC Mbr

— this port is a member of a port-

channel (LAG).

◆

Probe

 — this port is a probe port.

Admin Mode

The Port control administration state. The port must 
be enabled in order for it to be allowed into the 
network. May be enabled or disabled. The factory 
default is enabled.

Physical Mode

The desired port speed and duplex mode. If auto-
negotiation support is selected, then the duplex 
mode and speed is set from the auto-negotiation 
process. Note that the maximum capability of the 
port (full duplex -100M) is advertised. Otherwise, 
this object determines the port's duplex mode and 
transmission rate. The factory default is Auto.

Physical Status

The port speed and duplex mode.

Link Status

The Link is up or down.

Link Trap

This object determines whether or not to send a trap 
when link status changes. The factory default is 
enabled.

LACP Mode

LACP is enabled or disabled on this port.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands