manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 104

Chapter 3: Management Commands

101

 

show snmp

This command displays the current SNMP configuration.

Parameter

Description

host-addr

The IPv4 or IPv6 address of the host to send the trap 
or inform to.

user-name

User used to send a Trap or Inform message. This 
user must be associated with a group that supports 
the version and access method. The range is 1 to 30 
characters.

traps

Send SNMP traps to the host. This is the default 
option.

informs

Send SNMP informs to the host.

seconds

Number of seconds to wait for an acknowledgement 
before resending the Inform. The default is 15 
seconds. The range is 1 to 300 seconds.

retries

Number of times to resend an Inform. The default is 
3 attempts. The range is 0 to 255 retries.

auth

Enables authentication but not encryption.

noauth

No authentication or encryption. This is the default.

priv

Enables authentication and encryption.

port

The SNMP Trap receiver port. This value defaults to 
port 162.

filter-name

The filter name to associate with this host. Filters 
can be used to specify which traps are sent to this 
host. The range is 1 to 30 characters.

Format

show snmp

Mode

Privileged EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands