manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 93

90

SNMP Commands

 

no snmp-server 
community

This command removes this community name from the table. The 

name

 is the 

community name to be deleted.

snmp-server 
community-group

This command configures a community access string to permit access via the 
SNMPv1 and SNMPv2c protocols.

Mode

Global Config

Parameter

Description

community-name

A name associated with the switch and with a set of 
SNMP managers that manage it with a specified 
privileged level. The length of 

community

-

name

 can 

be up to 16 case-sensitive characters. 

ro | rw | su

The access mode of the SNMP community, which 
can be public (Read-Only/RO), private (Read-
Write/RW), or Super User (SU).

ip-address

The associated community SNMP packet sending 
address and is used along with the client IP mask 
value to denote a range of IP addresses from which 
SNMP clients may use that community to access the 
device. A value of 0.0.0.0 allows access from any IP 
address. Otherwise, this value is ANDed with the 
mask to determine the range of allowed client IP 
addresses.

view-name

The name of the view to create or update.

Format

no snmp-server community 

community-name

Mode

Global Config

Format

snmp-server community-group 

community-string

 

group-name

 

[ipaddress 

ipaddress

]

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands