manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 181

178

System Information and Statistics Commands

 

The output is displayed in script format, which can be used to configure another 
switch with the same configuration. If the optional 

scriptname

 is provided with 

a file name extension of “.scr”, the output is redirected to a script file.

Note

If you issue the 

show running-config 

command from a serial connection, 

access to the switch through remote connections (such as Telnet) is suspended 
while the output is being generated and displayed.

Note

If you use a text-based configuration file, the 

show running-config

 command 

only displays configured physical interfaces (i.e. if any interface only contains 
the default configuration, that interface will be skipped from the 

show running-

config

 command output). This is true for any configuration mode that contains 

nothing but default configuration. That is, the command to enter a particular 
config mode, followed immediately by its exit command, are both omitted from 
the 

show running-config

 command output (and hence from the startup-config 

file when the system configuration is saved.)

Use the following keys to navigate the command output. 

Note that 

--More-- or (q)uit

 is displayed at the bottom of the output screen 

until you reach the end of the output. 

This command captures the current settings of OSPFv2 and OSPFv3 trapflag 
status:

◆

If all the flags are enabled, then the command displays 

trapflags all

.

◆

If all the flags in a particular group are enabled, then the command displays 

trapflags group name all

.

◆

If some, but not all, of the flags in that group are enabled, the command 
displays 

trapflags groupname flag-name

.

Key

Action

Enter

Advance one line. 

Space Bar

Advance one page. 

q

Stop the output and return to the prompt. 

Format

show running-config [all | 

scriptname

]

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands