manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 202

Chapter 4: Utility Commands

199

 

 

The following shows example CLI display output for the command.

(CN1610) #show logging hosts ?

<cr>                     Press enter to execute the command.

|                        Output filter options.

(CN1610) #show logging hosts

Index  IP Address/Hostname       Severity   Port   Status

-------- ---------------------- -----------  ------ ---------

1         10.130.64.88 critical     514    Active 

2         2000::150 critical     514    Active

show logging 
persistent

Use the 

show logging persistent

 command to display persistent log entries. If 

log-files

 is specified, the system persistent log files are displayed.

Term

Definition

Host Index

(Used for deleting hosts.)

IP Address / 
Hostname

IP address or hostname of the logging host.

Severity Level

The minimum severity to log to the specified 
address. The possible values are emergency (0), alert 
(1), critical (2), error (3), warning (4), notice (5), 
info (6), or debug (7).

Port

The server port number, which is the port on the 
local host from which syslog messages are sent.

Host Status

Status field provides the current status of snmp row 
status. (Active,  Not in Service, Not Ready).

Format

show logging persistent [log-files]

Mode

Privileged EXEC

Parameter

Description

Persistent Logging

If persistent logging is enabled or disabled.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands