manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 406

Chapter 5: Switching Commands

403

 

no dot1x dynamic-
vlan enable

Use this command to prevent the switch from creating VLANs when a RADIUS-
assigned VLAN does not exist in the switch.

dot1x guest-vlan

This command configures VLAN as guest vlan on an interface or a range of 
interfaces. The command specifies an active VLAN as an IEEE 802.1X guest 
VLAN. The range is 1 to the maximum VLAN ID supported by the platform.

no dot1x guest-vlan

This command disables Guest VLAN on the interface.

dot1x initialize

This command begins the initialization sequence on the specified port. This 
command is only valid if the control mode for the specified port is auto or mac-
based. If the control mode is not auto or mac-based, an error will be returned.

Format

no dot1x dynamic-vlan enable

Mode

Global Config

Default

disabled

Format

dot1x guest-vlan 

vlan-id

Mode

Interface Config

Default

disabled

Format

no dot1x guest-vlan

Mode

Interface Config

Format

dot1x initialize

 

slot/port

Mode

Privileged EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands