manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 408

Chapter 5: Switching Commands

405

 

dot1x port-control

This command sets the authentication mode to use on the specified interface or 
range of interfaces. Use the 

force-unauthorized

 parameter to specify that the 

authenticator PAE unconditionally sets the controlled port to unauthorized. Use 
the 

force-authorized

 parameter to specify that the authenticator PAE 

unconditionally sets the controlled port to authorized. Use the 

auto

 parameter to 

specify that the authenticator PAE sets the controlled port mode to reflect the 
outcome of the authentication exchanges between the supplicant, authenticator 
and the authentication server. If the 

mac-based

 option is specified, then MAC-

based dot1x authentication is enabled on the port.

no dot1x port-
control

This command sets the 802.1X port control mode on the specified port to the 
default value.

dot1x port-control 
all

This command sets the authentication mode to use on all ports. Select 

force-

unauthorized

 to specify that the authenticator PAE unconditionally sets the 

controlled port to unauthorized. Select 

force-authorized

 to specify that the 

authenticator PAE unconditionally sets the controlled port to authorized. Select 

auto

 to specify that the authenticator PAE sets the controlled port mode to 

reflect the outcome of the authentication exchanges between the supplicant, 
authenticator and the authentication server. If the 

mac-based

 option is specified, 

then MAC-based dot1x authentication is enabled on the port.

Default

auto

Format

dot1x port-control {force-unauthorized | force-

authorized | auto | mac-based}

Mode

Interface Config

Format

no dot1x port-control

Mode

Interface Config

Default

auto

Format

dot1x port-control all {force-unauthorized | force-

authorized | auto | mac-based}

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands