manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 369

366

VLAN Commands

 

Port VLAN ID 
Current

The current VLAN ID that this port assigns to 
untagged frames or priority tagged frames received 
on this port. The factory default is 1. 

Acceptable Frame 
Types

The types of frames that may be received on this 
port. The options are 'VLAN only' and 'Admit All'. 
When set to 'VLAN only', untagged frames or 
priority tagged frames received on this port are 
discarded. When set to 'Admit All', untagged frames 
or priority tagged frames received on this port are 
accepted and assigned the value of the Port VLAN 
ID for this port. With either option, VLAN tagged 
frames are forwarded in accordance to the 802.1Q 
VLAN specification. 

Ingress Filtering 
Configured

May be enabled or disabled. When enabled, the 
frame is discarded if this port is not a member of the 
VLAN with which this frame is associated. In a 
tagged frame, the VLAN is identified by the VLAN 
ID in the tag. In an untagged frame, the VLAN is the 
Port VLAN ID specified for the port that received 
this frame. When disabled, all frames are forwarded 
in accordance with the 802.1Q VLAN bridge 
specification. The factory default is disabled. 

Ingress Filtering 
Current

Shows the current ingress filtering configuration. 

GVRP

May be enabled or disabled.

Default Priority

The 802.1p priority assigned to tagged packets 
arriving on the port.

Protected Port

Specifies if this is a protected port. If False, it is not 
a protected port; If true, it is. 

Switchport mode

The current switchport mode for the port. 

Operating parameters

The operating parameters for the port, including the 
VLAN, name, egress rule, and type. 

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands