manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 656

Chapter 7: Quality of Service Commands

653

 

Format

show mac access-lists 

[name]

Mode

Privileged EXEC

Term

Definition

Rule Number

The ordered rule number identifier defined within 
the MAC ACL.

Action

The action associated with each rule. The possible 
values are Permit or Deny.

Source MAC Address

The source MAC address for this rule.

Source MAC Mask

The source MAC mask for this rule.

Committed Rate

The committed rate defined by the rate-limit 
attribute.

Committed Burst Size

The committed burst size defined by the rate-limit 
attribute.

Destination MAC 
Address

The destination MAC address for this rule.

Ethertype

The Ethertype keyword or custom value for this rule.

VLAN ID

The VLAN identifier value or range for this rule.

COS

The COS (802.1p) value for this rule.

Log

Displays when you enable logging for the rule.

Assign Queue

The queue identifier to which packets matching this 
rule are assigned.

Mirror Interface

The slot/port to which packets matching this rule are 
copied.

Redirect Interface

The slot/port to which packets matching this rule are 
forwarded.

Time Range Name

Displays the name of the time-range if the MAC 
ACL rule has referenced a time range.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands