manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 495

492

DHCP Snooping Configuration Commands

 

The following shows example CLI display output for the command.

(CN1610) #show ip dhcp snooping

DHCP snooping is Disabled

DHCP snooping source MAC verification is enabled

DHCP snooping is enabled on the following VLANs:

11 - 30, 40

Interface   Trusted    Log Invalid Pkts                 

---------   --------   ----------------

0/1          Yes             No   

0/2          No             Yes   

0/3          No             Yes 

0/4          No              No

0/6          No              No

show ip dhcp 
snooping binding 

Use this command to display the DHCP Snooping binding entries. To restrict the 
output, use the following options:

◆

Dynamic: Restrict the output based on DCHP snooping.

◆

Interface: Restrict the output based on a specific interface.

◆

Static: Restrict the output based on static entries.

◆

VLAN: Restrict the output based on VLAN.

Term

Definition

Interface

The interface for which data is displayed.

Trusted

If it is enabled, DHCP snooping considers the port 
as trusted. The factory default is disabled.

Log Invalid Pkts

If it is enabled, DHCP snooping application logs 
invalid packets on the specified interface.

Format

show ip dhcp snooping binding [{static/dynamic}] 

[interface slot/port] [vlan id]

Mode

◆

Privileged EXEC

◆

User EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands