manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 392

Chapter 5: Switching Commands

389

 

switchport 
protected (Interface 
Config)

Use this command to add an interface to a protected port group. The 

groupid

 

parameter identifies the set of protected ports to which this interface is assigned. 
You can only configure an interface as protected in one group.

Note

Port protection occurs within a single switch. Protected port configuration does 
not affect traffic between ports on two different switches. No traffic forwarding is 
possible between two protected ports.

no switchport 
protected (Interface 
Config)

Use this command to configure a port as unprotected. The 

groupid

 parameter 

identifies the set of protected ports to which this interface is assigned.

show switchport 
protected 

This command displays the status of all the interfaces, including protected and 
unprotected interfaces.

Default

unprotected

Format

switchport protected

 groupid

Mode

Interface Config

Format

no switchport protected

 groupid

Mode

Interface Config

Format

show switchport protected

 groupid

Mode

◆

Privileged EXEC

◆

User EXEC

Term

Definition

Group ID

The number that identifies the protected port group.

Name

An optional name of the protected port group. The 
name can be up to 32 alphanumeric characters long, 
including blanks. The default is blank.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands