NetApp CN1610 Cli Command Reference Download Page 258

Page: 258 / 708

Chapter 4: Utility Commands

255

Src_IP: 11.1.1.1 Dest_IP: 225.0.0.5 Type: Membership_Query Group:

225.0.0.5

The following parameters are displayed in the trace message:

no debug
igmpsnooping
receive

This command disables tracing of received IGMP Snooping packets.

Parameter

Definition

A packet received by the device.

Intf

The interface that the packet went out on. Format
used is unit/slot/port (internal interface number).
Unit is always shown as 1 for interfaces.

Src_Mac

Source MAC address of the packet.

Dest_Mac

Destination multicast MAC address of the packet.

Src_IP

The source IP address in the ip header in the packet.

Dest_IP

The destination multicast ip address in the packet.

Type

The type of IGMP packet. Type can be one of the
following:

◆

Membership_Query

– IGMP Membership

Query

◆

V1_Membership_Report

– IGMP Version 1

Membership Report

◆

V2_Membership_Report

– IGMP Version 2

Membership Report

◆

V3_Membership_Report

– IGMP Version 3

Membership Report

◆

V2_Leave_Group

– IGMP Version 2 Leave

Group

Multicast group address in the IGMP header.

Format

no debug igmpsnooping receive

Mode

Privileged EXEC

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands

NetApp CN1610, Cli Command Reference

Search results

Summary of Contents for CN1610

Reviews:

Brands by name

Popular brands