manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 471

468

Port Mirroring Commands

 

no monitor

This command removes all the source ports and a destination port for the and 
restores the default value for mirroring session mode for all the configured 
sessions.

Note

This is a stand-alone “no” command. This command does not have a “normal” 
form.

show monitor 
session

This command displays the Port monitoring information for a particular 
mirroring session.

The

 session-id

 parameter is an integer value used to identify the session and 

ranges from 1–4.

Default

enabled

Format

no monitor

Mode

Global Config

Format

show monitor session

 

session-id

Mode

Privileged EXEC

Term

Definition

Session ID

An integer value used to identify the session. Its 
value can be anything between 1 and the maximum 
number of mirroring sessions allowed on the 
platform.

Monitor Session 
Mode

Indicates whether the Port Mirroring feature is 
enabled or disabled for the session identified with 

session-id

. The possible values are Enabled and 

Disabled.

Probe Port

Probe port (destination port) for the session 
identified with 

session-id

. If probe port is not set 

then this field is blank.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands