manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 413

410

Port-Based Network Access Control Commands

 

dot1x 
unauthenticated-
vlan

Use this command to configure the unauthenticated VLAN associated with the 
specified interface or range of interfaces. The unauthenticated VLAN ID can be a 
valid VLAN ID from 0-Maximum supported VLAN ID (4093 for FASTPATH). 
The unauthenticated VLAN must be statically configured in the VLAN database 
to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not 
operational.

no dot1x 
unauthenticated-
vlan

This command resets the unauthenticated-vlan associated with the port to its 
default value.

dot1x user

This command adds the specified user to the list of users with access to the 
specified port or all ports. The 

user

 parameter must be a configured user.

no dot1x user

This command removes the user from the list of users with access to the specified 
port or all ports.

Mode

Interface Config

Default

0

Format

dot1x unauthenticated-vlan 

vlan id

Mode

Interface Config

Format

no dot1x unauthenticated-vlan

Mode

Interface Config

Format

dot1x user 

user 

{slot/port | all}

Mode

Global Config

Format

no dot1x user 

user 

{slot/port | all}

Mode

Global Config

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands