![NetApp CN1610 Cli Command Reference Download Page 180](http://html.mh-extra.com/html/netapp/cn1610/cn1610_cli-command-reference_1669922180.webp)
Chapter 4: Utility Commands
177
The following shows example CLI display output for the command.
(CN1610) #show process proc-list
Process Application VM Size VM Peak
PID Name ID-Name Chld (KB) (KB) FD
Count
---- ---------------- -------------------- ---- -------- -------- -
15260 procmgr 0-procmgr No 1984 1984 8
15309 dataplane 1-dataplane No 293556 293560 11
15310 switchdrvr 2-switchdrvr No 177220 177408 57
15314 syncdb 3-syncdb No 2060 2080 8
show running-
config
Use this command to display or capture the current setting of different protocol
packages supported on the switch. This command displays or captures
commands with settings and configurations that differ from the default value. To
display or capture the commands with settings and configurations that are equal
to the default value, include the
all
option.
Note
Show running-config does not display the User Password, even if you set one
different from the default.
Parameter
Description
PID
The number the software uses to identify the
process.
Process Name
The name that identifies the process.
Application ID-Name
The application identifier and its associated name.
Child
Indicates whether the process has spawned a child
process.
VM Size
Virtual memory size.
VM Peak
The maximum amount of virtual memory the
process has used at a given time.
FD Count
The file descriptors count for the process.
Summary of Contents for CN1610
