manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 464

Chapter 5: Switching Commands

461

 

show port-channel 
brief

This command displays the static capability of all port-channel (LAG) interfaces 
on the device as well as a summary of individual port-channel interfaces. 

For each port-channel the following information is displayed:

System-ID

Represents the administrative value of the 
Aggregation Port’s protocol Partner’s System ID.

Admin Key

The administrative value of the Key for the protocol 
Partner.

Port Priority

The administrative value of the Key for protocol 
Partner.

Port-ID

The administrative value of the port number for the 
protocol Partner.

Admin State

The administrative values of the actor state for the 
protocol Partner.

Parameter

Description

Format

show port-channel brief

Mode

User EXEC

Term

Definition

Logical Interface

The slot/port of the logical interface.

Port-channel Name

The name of port-channel (LAG) interface.

Link-State

Shows whether the link is up or down.

Trap Flag

Shows whether trap flags are enabled or disabled.

Type

Shows whether the port-channel is statically or 
dynamically maintained.

Mbr Ports

The members of this port-channel.

Active Ports

The ports that are actively participating in the port-
channel.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands