manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 670

Chapter 7: Quality of Service Commands

667

 

[icmp-type

 icmp-

type

 [icmp-code 

icmp-code

] | icmp-

message 

icmp-

message

]

Note

This option is available only if the protocol is ICMP.

Specifies a match condition for ICMP packets.

When 

icmp-type

 is specified, IP ACL rule matches 

on the specified ICMP message type, a number 
from 0 to 255. 

When 

icmp-code

 is specified, IP ACL rule matches 

on the specified ICMP message code, a number 
from 0 to 255.

Specifying 

icmp-message

 implies both 

icmp-type

 

and 

icmp-code

 are specified. The following icmp-

messages are supported: echo, echo-reply, host-
redirect, mobile-redirect, net-redirect, net-
unreachable, redirect, packet-too-big, port-
unreachable, source-quench, router-solicitation, 
router-advertisement, time-exceeded, ttl-exceeded 
and unreachable.

The ICMP message is decoded into corresponding 
ICMP type and ICMP code within that ICMP type.

igmp-type 

igmp-type

Note

This option is visible only if the protocol is IGMP.

When 

igmp-type

 is specified, the IP ACL rule 

matches on the specified IGMP message type, a 
number from 0 to 255. 

fragments

Specifies that IP ACL rule matches on fragmented 
IP packets. 

log

Specifies that this rule is to be logged.

Parameter

Description

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands