manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 424

Chapter 5: Switching Commands

421

 

Supplicant Timeout

The timer used by the authenticator state machine on 
this port to timeout the supplicant. The value is 
expressed in seconds and will be in the range of 1 
and 65535.

Server Timeout

The timer used by the authenticator on this port to 
timeout the authentication server. The value is 
expressed in seconds and will be in the range of 1 
and 65535.

Maximum Requests

The maximum number of times the authenticator 
state machine on this port will retransmit an EAPOL 
EAP Request/Identity before timing out the 
supplicant. The value will be in the range of 1 and 
10.

Configured MAB 
Mode

The administrative mode of the MAC authentication 
bypass feature on the switch.

Operational MAB 
Mode

The operational mode of the MAC authentication 
bypass feature on the switch. MAB might be 
administratively enabled but not operational if the 
control mode is not MAC based.

Vlan-ID

The VLAN assigned to the port by the radius server. 
This is only valid when the port control mode is not 
Mac-based.

VLAN Assigned 
Reason

The reason the VLAN identified in the VLAN-
assigned field has been assigned to the port. Possible 
values are RADIUS, Unauthenticated VLAN, Guest 
VLAN, default, and Not Assigned. When the VLAN 
Assigned Reason is Not Assigned, it means that the 
port has not been assigned to any VLAN by dot1x. 
This only valid when the port control mode is not 
MAC-based.

Reauthentication 
Period

The timer used by the authenticator state machine on 
this port to determine when reauthentication of the 
supplicant takes place. The value is expressed in 
seconds and will be in the range of 1 and 65535.

Term

Definition

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands