NetApp CN1610, Cli Command Reference

Page: 429 / 708

426 Port-Based Network Access Control Commands
show dot1x clients
This command displays 802.1X client information. This command also displays
information about the number of clients that are authenticated using Monitor
mode and using 802.1X.
Format
show dot1x clients {slot/port | all}
Mode Privileged EXEC
Term Definition
Clients Authenticated
using Monitor Mode Indicates the number of the Dot1x clients
authenticated using Monitor mode.
Clients Authenticated
using Dot1x Indicates the number of Dot1x clients authenticated
using 802.1x authentication process.
Logical Interface The logical port number associated with a client.
Interface The physical port to which the supplicant is
associated.
User Name The user name used by the client to authenticate to
the server.
Supplicant MAC
Address The supplicant device MAC address.
Session Time The time since the supplicant is logged on.
Filter ID Identifies the Filter ID returned by the RADIUS
server when the client was authenticated. This is a
configured DiffServ policy name on the switch.
VLAN ID The VLAN assigned to the port.
VLAN Assigned The reason the VLAN identified in the VLAN ID
field has been assigned to the port. Possible values
are RADIUS, Unauthenticated VLAN, Monitor
Mode, or Default. When the VLAN Assigned reason
is Default, it means that the VLAN was assigned to
the port because the P-VID of the port was that
VLAN ID.