manualshive.com logo in svg

NetApp CN1610, Cli Command Reference

Share
Download
NetApp CN1610 Cli Command Reference Download Page 601

598

IPv6 Management Commands

 

no network ipv6 
address 

The command 

no network ipv6 address

 removes all configured IPv6 prefixes.

Use this command with the address option to remove the manually configured 
IPv6 global address on the network port interface.

Use this command with the autoconfig option to disable the stateless global 
address autoconfiguration on the network port.

Use this command with the dhcp option disables the dhcpv6 client protocol on 
the network port.

network ipv6 
gateway

Use this command to configure IPv6 gateway (i.e. default routers) information 
for the network port.

no network ipv6 
gateway

Use this command to remove IPv6 gateways on the network port interface.

autoconfig

Configure stateless global address autoconfiguration 
capability.

dhcp

Configure dhcpv6 client protocol.

Parameter

Description

Format

no network ipv6 address {

address/prefix-length 

[eui64] | autoconfig | dhcp}

Mode

Privileged EXEC

Format

network ipv6 gateway 

gateway-address

Mode

Privileged EXEC

Parameter

Description

gateway-address

Gateway address in IPv6 global or link-local address 
format.

Summary of Contents for CN1610





































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands